1 1.0 amperes 20 to 100 volts .082(2.08) .076(1.93) .012(.31) .006(.15) .012(.31) .006(.15) .008(.20) .004(.10) .056(1.41) .035(0.90) .147(3.73) .137(3.48) .187(4.75) .167(4.25) .103(2.61) .078(1.99) .208(5.28) .200(5.08) sk12b thru sk110b 1.0 amps. surface mount schottky barrier rectifiers voltage range current f eatures for surface mounted application metal to silicon rectifier, majority carrier conduction low forward voltage drop easy pick and place high surge current capability plastic material used carriers underwriters laboratory classification 94v-o epitaxial construction high temperature soldering: 260 o c / 10 seconds at terminals m echanical data case: molded plastic terminals: solder plated polarity: indicated by cathode band packaging: 16mm tape per eia std rs-481 weight: 0.093 gram smb/do-214aa dimensions in inches and (millimeters) m aximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz , resistive or inductive load. for capacitive load, derate current by 20% type number symbol sk 12b sk 13b sk 14b sk 15b sk 16b sk 110b unit s maximum recurrent peak reverse voltage v rrm 20 30 40 50 60 100 v maximum rms voltage v rms 14 21 28 35 42 70 v maximum dc blocking voltage v dc 20 30 40 50 60 100 v maximum average forward rectified current at t a =75 i (av) 1.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 30 a maximum instantaneous forward voltage @ 1.0a v f 0.5 0.75 0.85 v 0.5 maximum dc reverse current (note 1)@ t a =25 at rated dc blocking voltage @ t a =100 i r 10.0 5.0 1.0 ma ma typical thermal resistance ( note 1 ) r jl 25 /w typical junction capacitance (note 2) cj 110 pf operating temperature range t j -55 to +125 -55 to +150 storage temperature range t stg -55 to +150 notes : 1. thermal resistance from junction to lead. 2. measured at 1.0 mhz and applies reverse voltage of 4.0v. 3. measured on p.c.board with 0.4 x 0.4? (10 x 10mm) copper pad areas. xinghe electronics e?o?? gaomi xinghe electronicsco.,ltd. www.sddzg.com tel:0536-2210359 qq:464768017
ratings and characteristic curves (sk12b thru sk110b) fig.2- maximum non-repetitive forward surge current peak for ward surge current . (a) 1 10 100 0 10 20 40 30 50 number of cycles at 60hz at rated tl 8.3ms single half sine wave jedec method fig.1- maximum forward current derating curve average for ward current . (a) 50 60 70 80 90 100 110 120 170 160 150 140 130 0 0.5 1.0 lead temperature. ( c) o resistive or inductive load sk15b & sk110b sk12b- sk14b pcb mounted on 0.4x0.4" (10x10mm) copper pad areas fig.3- typical forward characteristics instantaneous for ward current . (a) 0 .2 .4 .6 .8 1.0 1.2 1.4 1.6 0.01 0.1 1 10.0 50 forward voltage. (v) sk12b-sk14b sk15b & SK16B sk110b fig.4- typical reverse characteristics instantaneous reverse current . (ma) 0 20 40 60 80 100 120 140 0.001 0.01 0.1 1 10 100 percent of rated peak reverse voltage. (%) tj=125 c 0 tj=25 c 0 tj=75 c 0 sk12b-sk14b sk15b & SK16B sk110b fig.5- typical junction capacitance junction cap acitance.(pf) .1 1.0 10 100 10 100 400 reverse voltage. (v) tj=25 c f=1.0mhz vsig=50mvp-p 0 pulse width=300 s 1% duty cycle 1.0 amperes 20 to 100 volts sk12b thru sk110b 1.0 amps. surface mount schottky barrier rectifiers voltage range current xinghe electronics e?o?? 2 gaomi xinghe electronicsco.,ltd. www.sddzg.com tel:0536-2210359 qq:464768017
|
